Product Contects
   Steel cord conveyor belt
   fire-resistant steel cord co
   Polyester conveyor belt
   Nylon conveyor belt
   Cotton,Polyster Cotton conve
   Solid woven conveyor belt
   Flame retardant conveyor bel
   Heat resistant,high temperat
   Chemical resistant conveyor
   Oil resistant conveyor belt
   Cold resistant conveyor belt
   Pipe convyor belt
   Endless conveyor belt
   Raised edge conveyor belt
   Patterned conveyyor belt
   Abrasive resistant and Energ
   Anti-tear conveyor belt
   Vacuum Hydroextractor Belt
   Anti-tear conveyor belt
  
QUICK MENU
 
Solid woven conveyor belt 

Construction:

Classification of product:

1.Non pressed  PVC type
After dipping with PVC paste on the soild woven fabric,add PVC cover on the solid carcass to form the belt.
2.PVG type
Based on the non pressed PVC type,the carcass is covered with top and bottom covers composed mainly of rubber.the belt is then formed after being pressed.

 

construction features and applications:
1.The belt has good flame resistant and anti-static properties.it can fully satisfy the requirements of MT-914 and is especially suitable for material conveying at inflammable conditions of underground coal mines.
2.The solid woven fabric uses high tensile strength and low elongation polyester long filament as warp fibre,for weft fibre,it uses high tensile and medium modulus nylon filament.The fabric is high in strength,low in elongation,light in carcass,free of separation of plies,shock resistant,anti-tear and good in troughability.
3.Non pressed PVC type is suitable for applications in dry conditions at a slope angle of no greater than 16 degrees.PVG type is suitable for applications in wet conditions at a slope angle of less than 20 degrees.
4.PVG type is covered with covers mainly composed of rubber,which further improves the troughability,resistance to wetness and slip,resistance to low temperature,elongation and wear resistance of the belt.Thus it can not only enhance the slope angle of conveying but also elongate life of belt.

 

TECHNICAL SPECIFICATIONS FOR REFERENCE:

Grade of strength
(as Chinese norm)
Warp Tensile strength (Min)
Cover grade and recommended thickness(mm)
Belt width
(mm)
PVC
PVG
680s
680
0.8+0.8
1.5+1.5
 
 
 
 
650~1200
800s
800
0.8+0.8
1.5+1.5
1000s
1000
0.8+0.8
1.5+1.5
1250s
1250
0.8+0.8
1.5+1.5
1400s
1400
0.8+0.8
1.5+1.5
1600s
1600
0.8+0.8
2+2
1800s
1800
0.8+0.8
2+2
2000s
2000
0.8+0.8
2+2
2240s
2240
0.8+0.8
2+2

Recommenfed minimum pulley diameter:

Grade of strength(as per chinese norm) 680/1 800/1 1000/1 1250/1 1400/1 1600/1 1800/1 2000/1 2500/1 3100/1
t4 t5 t6 t7 t8 t9 t10 t11 t13 t15
Pulley diameter 400 500 630 750 750 800 800 1000 1200 1500


 

Zhejiang Double Arrow Rubber Co.,Ltd.
Copyright© 2008 DoubleArrow.Net
All right reserced.
product contents contact us add feedback